Ultradeck – Mobile Fidelity (Without Cartridge) [Phono Pre-Amp Needed]

Description

MoFi Ultradeck Turntable Overview:

The word Ultra is synonymous with Mobile Fidelity Sound Lab’s philosophy. Is the Utltradeck Turntable good? Yes, It is not just good, It is one of the best because it represents extreme pursuit of the highest level of reproduction of recorded soundbeyond the status quoto provide music lovers with the experience of hearing the Original Master Recording in their home. Whether you’re enjoying a standard LP or one of our UltraDisc One-Step limited-edition records, UltraDeck will deliver faithful playback of what’s in the grooves.

Why choose Ultradeck Turntable?

• 33-1/3 / 45.0 RPM belt drive turntable
• Custom design and manufactured in the USA
• 10-inch MoFi Ultra Tonearm
• 1.3-inch Delrin platter
• Isolated 300 RPM AC synchronous motor
• Anti-Vibration feet designed by HRS

ULTRA TONEARM

Custom-developed and manufactured in the USA, the 10-inch Ultra tonearm uses smooth, high-quality ball bearings for low friction in the vertical and horizontal plane so all you hear is what is in the grooves. Cardas Audio wiring maintains signal purity from the headshell leads all the way through to the high-quality, gold-plated RCA connectors.

ISOLATED AC SYNCHRONOUS MOTOR

Our stepped-pulley AC motor provides excellent speed stability for pitch accuracy and rhythmic drive. The Delrin pulley has two positions for 33 1/3 and 45 RPM speed selection. Motor vibrations are kept away from the platter and stylus by using advanced dampening materials that decouple the motor from the rest of the mofi ultradeck turntable.

CONSTRAINED LAYER DAMPENING

UltraDeck Turntable features three aluminum plates carefully bonded to an MDF body to add mass and eliminate tonal coloration, maintaining the true sound found on the record.

METICULOUS DESIGN AND EVALUATION

Advanced technology, user-friendly features, and unflappable design elements ensure phenomenal playbackultimately bringing the sound of Mobile Fidelitys famous studio into your home with mofi ultradeck turntable

ANTI-VIBRATION FEET BY HRS

Any vibration of the stylus that is not created by the grooves in the record is a distortion that will mask musical detail. Developed in conjunction with the engineering team at Harmonic Resolution Systems, the world leader in vibration isolation for audio equipment, the included MoFi anti-vibration feet isolate your turntable from bad vibrations.

1.3-INCH DELRIN PLATTER

UltraDeck features a massive 1.3-inch Delrin platter. The increased mass creates blacker sonic backgrounds and a lower noise floor. Delrin is a next-generation polymer developed by Dupont. In the world of audio, Delrin’s highly crystalline structure presents a wonderful impedance match to vinyl records, effectively grounding unwanted noise and keeping it away from the stylus.

HARDENED-STEEL INVERTED BEARING

Our hardened-steel inverted bearing system is designed for smooth, quiet rotational stability. The extremely low tolerance combination of steel, bronze, and sapphirefound in much more expensive turntableswill provide you many years of high-performance playback.

MoFi Ultradeck Turntable Technical Specifications

• Motor: 300 RPM AC Synchronous
• Speeds: 33 1/3 RPM, 45.0 RPM
• Platter: 6.8 lb Delrin
• Wow & Flutter: 0.017% 0.025%
• Signal-To-Noise Ratio: 74dB
• Power Supply Requirements: 120V 60Hz, 220-230V 50Hz, 100V 50Hz
• Power Consumption: < 5W
• Dimensions: 19.69″ x 5.375″ x 14.25″
• Weight: 23.1 lb
• TONEARM SPECIFICATIONS
• Type: 10″ straight aluminum, gimbal bearing
• Overhang: 0.71″ (18mm)
• Offset Angle: 22.8 (+/- 2 adjustable)
• Cartridge Weight Range: 5g 10g

Buy Records

BuyPre-Owned & Vintage Gear

New to the world of Record Player?Read our beginnersguide to turntable setup

Top 5 Turntables of 2022 Under 1 Lakh In India

Have questions on how to choose a turntable?Read ourTurntable FAQs